abort bizhub c200

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • giorgio79
    Junior Member
    • Nov 2022
    • 2
    #1

    abort bizhub c200

    I see this message. bizhub c200
    ABORT
    code =0x0000b016
    tskname =tRT32767
    tskind =0x00007fff
    build_2231.130306
    please wait



    stays on for 30 seconds and turns off.
    by moving the white flexible cable it turns on and off, of the motherboard.
    Has anyone had similar problems?
    Tags: abort, bizhub, c200, turns, white
    • Synthohol
      Certified Konica Expert

      Site Contributor
      5,000+ Posts
      • Mar 2016
      • 5748
      #2
      Re: abort bizhub c200

      0x00000000 to 0x000fffff OS processing system failure • MFBUB
      id check all the connections and try firmware first then if no joy replace the board.
      Attached Files
      We know a thing or two because we've seen a thing or two.
      The medication helps though...

        Comment

        • giorgio79
          Junior Member
          • Nov 2022
          • 2
          #3
          Re: abort bizhub c200

          20221116_164214.jpg
          I thought so too motherboard.
          i have this card code MFBU AF1-00474 AG1-000327-005 LOT- /secondary code 0822-008
          on the internet I found this one that only changes the numbers at the bottom MFBU AF1-00474 AG1-000327-005 LOT- /secondary code 0830-008.
          Do you think it is compatible?
          Attached Files

            Comment

            Previous template Next
            Working...