Fiery E100-02 IC-413 For KM Bizhub Press C7000P

[Synthohol]

Re: Fiery E100-02 IC-413 For KM Bizhub Press C7000P

also the fiery ip will likely be 172.254.x.x to start. command workstation should find it then run the fiery setup from CWS and input all your settings.

[Danny9279]

Re: Fiery E100-02 IC-413 For KM Bizhub Press C7000P

also the fiery ip will likely be 172.254.x.x to start. command workstation should find it then run the fiery setup from CWS and input all your settings.

Thanks Synthohol,

Your solution worked, I was able to install the fiery ISO vie the network connection. What threw me off was that I assigned a 10.10.10.1 as the IP but apparently the Fiery Network Card had an embedded IP of 192.168.x.x

This morning I was able to connect via the Workstation. This afternoon I'll work on it to get it finalized.

But again Thank You Very Much for the Assist.

[Synthohol]

Re: Fiery E100-02 IC-413 For KM Bizhub Press C7000P

anytime.

[tsbservice]

Re: Fiery E100-02 IC-413 For KM Bizhub Press C7000P

Thanks Synthohol,

Your solution worked, I was able to install the fiery ISO vie the network connection. What threw me off was that I assigned a 10.10.10.1 as the IP but apparently the Fiery Network Card had an embedded IP of 192.168.x.x

This morning I was able to connect via the Workstation. This afternoon I'll work on it to get it finalized.

But again Thank You Very Much for the Assist.

We all like helpful techs being around.
They are always up to the task 🙂
Thanks for recognising one of them.