Diagonal fuzzy lines through colours

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • rrrohan
    Service Manager

    Site Contributor
    1,000+ Posts
    • Sep 2011
    • 1977
    #1

    Diagonal fuzzy lines through colours

    Have a C308 thats putting fuzzy looking lines through halftones.

    in the last month every consumable was replaced due to non genuine toner ruining the devs.
    so no part is consumed more than 5%

    Compared to the same copier in other part of office and that one prints fine.

    Going to try the laser first



    bad demo page from RE88.JPG
    Last edited by rrrohan; 03-10-2023, 03:55 AM.
    Tags: compared, consumed, fuzzy, lines, part
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22929
      #2
      Re: Diagonal fuzzy lines through colours

      Did you do a gradation after replacing the consumables? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • femaster
          Service Manager

          1,000+ Posts
          • May 2011
          • 1458
          #3
          Re: Diagonal fuzzy lines through colours

          Originally posted by rrrohan
          Have a C308 thats putting fuzzy looking lines through halftones.

          in the last month every consumable was replaced due to non genuine toner ruining the devs.
          so no part is consumed more than 5%

          Compared to the same copier in other part of office and that one prints fine.

          Going to try the laser first
          That does seem like it could be the laser. We've had a number of the 8-series machines with strange and unusual laser issues; way more than any other model to date. If you don't count the laser problems of the C203/C253/C353 machines that is...
          A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
          My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

            Comment

            • rrrohan
              Service Manager

              Site Contributor
              1,000+ Posts
              • Sep 2011
              • 1977
              #4
              Re: Diagonal fuzzy lines through colours

              Originally posted by femaster
              That does seem like it could be the laser. We've had a number of the 8-series machines with strange and unusual laser issues; way more than any other model to date. If you don't count the laser problems of the C203/C253/C353 machines that is...
              so glad they are 1 unit these days. first one i did i drove over a hour with only the black laser thinking i could just replace the faulty one lol

                Comment

                • tsbservice
                  Field tech

                  Site Contributor
                  5,000+ Posts
                  • May 2007
                  • 7910
                  #5
                  Re: Diagonal fuzzy lines through colours

                  +1 on PH unit (laser).
                  A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
                  Blessed are they who can laugh at themselves, for they shall never cease to be amused.

                    Comment

                    • rrrohan
                      Service Manager

                      Site Contributor
                      1,000+ Posts
                      • Sep 2011
                      • 1977
                      #6
                      Re: Diagonal fuzzy lines through colours

                      conclusion: print head/laser replacement fixed issue. good advise thanks guys

                        Comment

                        Previous template Next
                        Working...