Fiery ic-413 crashes

[dami1405]

Re: Fiery ic-413 crashes

sent you a PM

thank you
thank you

[dami1405]

Re: Fiery ic-413 crashes

When upgrading the frame, rip does not start, everything works as it should, 00 is on the display,
The question is whether the OS needs to be reinstalled to recognize 4 or 8 ram memories, I can't teach remote desktop because I don't know what the Fiery password Fiery. 1 doesn't go through

[peter42]

Re: Fiery ic-413 crashes

Try Fierz.1, depending on your connected Keyboard.

[dami1405]

Re: Fiery ic-413 crashes

Try Fierz.1, depending on your connected Keyboard.

It failed, it didn't

[dami1405]

Re: Fiery ic-413 crashes

1. installed the bios
2. replaced the 2x2 gb module
3. replaced hard with W7 sis 1.11
4. does not recognize rip on minolta
5. returned ram to 1x1 mb works
The question is whether the system needs to be reinstalled for more RAM or does it only work on 2 RAM memory,when booting, it correctly says that the bios recognized the memory and 2 ram and 4 gb

Can I have some help?

[Synthohol]

Re: Fiery ic-413 crashes

you import the patch to the direct queue through command workstation.
that will upgrade the motherboard bios.
then proceed with the upgrade but 1.11 needs another disk that comes with the upgrade kit.
that disk is not offered on MKM as its a paid upgrade.

can you log onto it with CWS or its webpage?

[dami1405]

Re: Fiery ic-413 crashes

you import the patch to the direct queue through command workstation.
that will upgrade the motherboard bios.
then proceed with the upgrade but 1.11 needs another disk that comes with the upgrade kit.
that disk is not offered on MKM as its a paid upgrade.

can you log onto it with CWS or its webpage?

I can log in to CWS, remote desktop works the same, prints,
My question is when I put more ram the rip just doesn't start what to do to make it work with more ram 4gb

[dami1405]

Re: Fiery ic-413 crashes

I do all this on the 1.11 version, the same thing and the 1.0 version