Bizhub c3350i not fusing

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • femaster
    Service Manager

    1,000+ Posts
    • May 2011
    • 1448
    #16
    Re: Bizhub c3350i not fusing

    Not sure where you are located, but a fuser for the C3350i direct from KM in the US runs $315. Even that seems like highway robbery to me, but it is certainly better than the $500 you were looking at.
    A Ricoh Service Tech for 7 year. A Konica Minolta Service Tech for 7 years. Now, KM service manager for 4 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

      Comment

      • Hansoon
        Field Supervisor

        Site Contributor
        2,500+ Posts
        • Sep 2007
        • 3337
        #17
        Re: Bizhub c3350i not fusing

        Originally posted by blazebusiness
        If you can buy direct from Konica or a Konica master distributor like ACM, You could just purchase a C3300i printer for around $500 to $575 brand new and you will have a fuser, itb unit, tray 1 feed unit and more for the same price you said you are paying for a fuser. Toners and image units are different though.
        I think this is a very good idea and is more or less what we are doing. We buy from a wholesaler used machines with very little on the clock as a donor for several parts and saving loads of money by doing this.

        Hans
        " Sent from my Intel 80286 using MS-DOS 2.0 "

          Comment

          Previous 1 2 template Next
          Working...