Power Supply Bizhub 601 Board Electronic Scheme

[william023]

hi everyone

i have an issue for my bizhub 601 power supply unit, do you guys have board electronic circuit shceme for this PSU ? because i want to repair it, but dont know the scheme. thank you guys

[copyman]

Re: Power Supply Bizhub 601 Board Electronic Scheme

hi everyone

i have an issue for my bizhub 601 power supply unit, do you guys have board electronic circuit shceme for this PSU ? because i want to repair it, but dont know the scheme. thank you guys

The electrical schematics are in the Bizhub 751/601 "field service manual". Maybe you can find manual online or if you make a small contribution to this website I will send manual to you.

[wjurls]

Re: Power Supply Bizhub 601 Board Electronic Scheme

If you are looking for component level board schematics, you won't find those in the service manual.

The only people that may have those would be the guys over at Hytec, but I doubt they would share them.

[copyman]

Re: Power Supply Bizhub 601 Board Electronic Scheme

wjurls is right. I don't know of any OEM's that have componet level diagrams available.

If you have a shipping address in USA I may still have a good power supply for the Biz 601

[tsbservice]

Re: Power Supply Bizhub 601 Board Electronic Scheme

First post location is shown dead model you guys are barking at wrong tree
Forget about it.

[copyman]

Re: Power Supply Bizhub 601 Board Electronic Scheme

First post location is shown dead model you guys are barking at wrong tree
Forget about it.

Yes I saw location, what I meant was if they had a relative in US I would ship to them and they could forward it. I have done this a few times in the past.

Agree machine is way old and as I've posted in the past it's perhaps one of the worse machines ever. Many issues but most common was the developer getting contaminated from paper dust due to recycling waste toner! This "Konica" footprint was used for many years and was just horrible! It's the machine that gave "Minolta" a bad name when Kon/Min first merged.

But keep in mind this old model might be all they can get in certain countries and have no choice but try and repair. Damn the OP is willing to troubleshoot to componet level to get it working! Good for him if he can do that.

Anyway the Biz 601 parts I have are going into next dumpster and figured if they can help someone that is better than dumping into landfill.