KM C2060L slow boot.
Collapse
X
-
-
-
Re: KM C2060L slow boot.
In our case, after searching, it was PRIPB. Suddenly.Leave a comment:
-
Re: KM C2060L slow boot.
hello everyone,
I have this KM C2060L with a weird habit.
machine is 5 years old, end of lease, roughly 2m clicks.
this machine takes its time to boot.. and i mean anywhere between 10 mins to 90 mins to start its booting process.
i have blue light on the screen but no lights on boards. it stays like this for a while, and then it decides randomly to come alive.
starts normally and works normally.
if i restart the machine either sub power or main power buttons it does exactly the same thing.. taking its time to come back.
any help would be welcome!
many thanks!
I contact the customer on Monday to check status and they said it was up and running when they came in. I am going to start by replacing Power Supply 1. There is a similar known issue with the Accurioprint 1100 doing the same thing and PS1 fixes it.Leave a comment:
-
Re: KM C2060L slow boot.
Hi, i think you nedd to change the fiery hdd by a new one with the same specifications.
hello everyone,
I have this KM C2060L with a weird habit.
machine is 5 years old, end of lease, roughly 2m clicks.
this machine takes its time to boot.. and i mean anywhere between 10 mins to 90 mins to start its booting process.
i have blue light on the screen but no lights on boards. it stays like this for a while, and then it decides randomly to come alive.
starts normally and works normally.
if i restart the machine either sub power or main power buttons it does exactly the same thing.. taking its time to come back.
any help would be welcome!
many thanks!Leave a comment:
-
KM C2060L slow boot.
hello everyone,
I have this KM C2060L with a weird habit.
machine is 5 years old, end of lease, roughly 2m clicks.
this machine takes its time to boot.. and i mean anywhere between 10 mins to 90 mins to start its booting process.
i have blue light on the screen but no lights on boards. it stays like this for a while, and then it decides randomly to come alive.
starts normally and works normally.
if i restart the machine either sub power or main power buttons it does exactly the same thing.. taking its time to come back.
any help would be welcome!
many thanks!
Leave a comment: