C458 with strips

[Carlos Rego]

my printer ,started making black stripes on the edges of the paper,I have already changed my transfer belt,which was needed ,and thought it would resolve my problem but still continues. previously have changed bk drum.received_953817942985788.jpgreceived_386155834385274.jpg
Can anyone help me.

[copyman]

Re: C458 with strips

Even though you repalced the black drum it still looks to be the problem. Was it a genuine drum? Is toner genuine or aftermarket?

[Carlos Rego]

Re: C458 with strips

Even though you repalced the black drum it still looks to be the problem. Was it a genuine drum? Is toner genuine or aftermarket?

Yes I replaced with genuine drum and toner are always genuine.

[Synthohol]

Re: C458 with strips

looks to me like a lousy toner spill on the printhead.
remove the drum and DV unit and inspect the laser slit glass.
check DV unit mag roller. maybe something behind doctor blade.

[Carlos Rego]

Re: C458 with strips

looks to me like a lousy toner spill on the printhead.
remove the drum and DV unit and inspect the laser slit glass.
check DV unit mag roller. maybe something behind doctor blade.

Thanks I will try that

[copyman]

Re: C458 with strips

looks to me like a lousy toner spill on the printhead.
remove the drum and DV unit and inspect the laser slit glass.
check DV unit mag roller. maybe something behind doctor blade.

Wouldn't toner on laser glass cause white voids?

[allan]

Re: C458 with strips

How is the condition of your fuser sleeve and pressure roller?

[Synthohol]

Re: C458 with strips

Wouldn't toner on laser glass cause white voids?

when your eyes are 58 years old and someone posts a friggin postage stamp size of a pic to diagnose CQ this is what you get.
the first pics look like a 3" void down the middle of the page. like the mag roller is bare.
if thats just the edge of the page? well, please consider a full size pic to examine.

[copyman]

Re: C458 with strips

when your eyes are 58 years old and someone posts a friggin postage stamp size of a pic to diagnose CQ this is what you get.
the first pics look like a 3" void down the middle of the page. like the mag roller is bare.
if thats just the edge of the page? well, please consider a full size pic to examine.

ha-ha. I hear you brother with my old eyes it is hard to see that small pic. Agree it could be developer related, especially since the black drum & trans belt have been repalced.

[allan]

Re: C458 with strips

when your eyes are 58 years old and someone posts a friggin postage stamp size of a pic to diagnose CQ this is what you get.
the first pics look like a 3" void down the middle of the page. like the mag roller is bare.
if thats just the edge of the page? well, please consider a full size pic to examine.

It looks like the edge of the page. I am familiar with the internal printout. It looks like soiling more than lines to me.
Would be better if the OP can upload a PDF instead.

[tsbservice]

Re: C458 with strips

Looks like developer spilled to me. But with so small information could be really everything.

[Tech09]

Re: C458 with strips

How is the condition of your fuser sleeve and pressure roller?

Agree with Allan, definitely take a look at your fuser.

[Carlos Rego]

Re: C458 with strips

It looks like the edge of the page. I am familiar with the internal printout. It looks like soiling more than lines to me.
Would be better if the OP can upload a PDF instead.

Ended up to be the fuser, thank you, everyone for your help