es2000 spectrometer on fiery command workstation 5.3.1

[zubinn]

hi, i use fiery command workstation 5.3.1 with a konica c7000

under calibration i see the choice for ES1000 / Xrite DPT etc etc

How do install or enable ES2000 ?

[romario]

Re: es2000 spectrometer on fiery command workstation 5.3.1

hi, i use fiery command workstation 5.3.1 with a konica c7000

under calibration i see the choice for ES1000 / Xrite DPT etc etc

How do install or enable ES2000 ?

You have to look for the driver for e2000, when I go to the office I can give it to you

[Saturn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

You need to have Fiery Command WorkStation 5.7 or later to connect the ES-2000.

[zubinn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

You need to have Fiery Command WorkStation 5.7 or later to connect the ES-2000.

inchecked the fiery download site they currently only offer Cws 6x

[Synthohol]

Re: es2000 spectrometer on fiery command workstation 5.3.1

If you web In to the fiery you can download CWS from there.

[Saturn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

inchecked the fiery download site they currently only offer Cws 6x

So why don't you use CWS 6?

[zubinn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

is that the best solution ? it may disrupt production if it does not install properly, so i would need to install it on a separate computer to try it out, and if it works great, but if it doesnt at least i have my other computer intact

So why don't you use CWS 6?

[Saturn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

is that the best solution ? it may disrupt production if it does not install properly, so i would need to install it on a separate computer to try it out, and if it works great, but if it doesnt at least i have my other computer intact

You can install the CWS on different computers, e.g. one computer with CWS 5.3.1 and one with CWS 6.x.
So you can use the computer with CWS 6.x to calibrate the machine using the ES2000 and the one with CWS 5.3.1 to manage the print jobs.

[zubinn]

Re: es2000 spectrometer on fiery command workstation 5.3.1

You can install the CWS on different computers, e.g. one computer with CWS 5.3.1 and one with CWS 6.x.
So you can use the computer with CWS 6.x to calibrate the machine using the ES2000 and the one with CWS 5.3.1 to manage the print jobs.

great idea i will seriously give that a shot.

[Synthohol]

Re: es2000 spectrometer on fiery command workstation 5.3.1

i have both v5 and v6 on my laptop, just have to specify when installing 6 you want to leave 5 alone and not upgrade it to 6 but install a separate install.