[Misc] I series storage boards

[emujo2]

I'm starting a new topic as there are a few threads regarding this in several diff posts.

Has anyone had success with buying new storage boards and getting them to work? At a cost of $400 each I'm trying to save money. These boards are $10-20 from amazon. WD PC SN740 NVMe SSD 256gb. We cannot get them to work..Any of you have a procedure written out?

[Woxner]

Re: I series storage boards

They will not work. We tried also.

[copier tech]

Re: I series storage boards

I'm starting a new topic as there are a few threads regarding this in several diff posts.

Has anyone had success with buying new storage boards and getting them to work? At a cost of $400 each I'm trying to save money. These boards are $10-20 from amazon. WD PC SN740 NVMe SSD 256gb. We cannot get them to work..Any of you have a procedure written out?

A better option is to buy USB caddy to format / delete the partitions on the 'failed' KM board this usually gets them going again.

Konica Minolta released an official bulletin on this.