c350 c-12c0 reset

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cantonakis
    Technician
    • Apr 2008
    • 19
    #1

    c350 c-12c0 reset

    After changing the HD on the fiery the code c-12c0 keeps comming up when the machine boots. The controler boots fine and the new disk. I change the fiery from another machine and this code keeps comming up.
    Does anyone know who to reset this ?
    Thanks
    Tags: c-1, c12c0, c350, comming, mfp board, reset, stalling
    • xpress
      Technician

      50+ Posts
      • Jun 2008
      • 63
      #2
      Originally posted by cantonakis
      After changing the HD on the fiery the code c-12c0 keeps comming up when the machine boots. The controler boots fine and the new disk.
      Thanks

      Does it start or not? Try disabling it, installing it, and then enabling it.

        Comment

        • copytechman
          Senior Tech

          Site Contributor
          500+ Posts
          • Nov 2008
          • 926
          #3
          According to the book thats the code for the hdd mounted to the mfp board, not the fiery.. check that!

          Regards!
          a.

            Comment

            • cantonakis
              Technician
              • Apr 2008
              • 19
              #4
              ok I solve the problem
              In the system incoming, HDD , the HDD it was set to SET so I change it to UNSET and the problem went away.
              Thaks to all of you

                Comment

                Previous template Next
                Working...