Black Patch at center of page during coping only C252

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • AjitN
    Trusted Tech

    250+ Posts
    • Mar 2009
    • 287
    #1

    Black Patch at center of page during coping only C252

    It sounds very funny but its a new install & I have done all installation procedures twice, but still C252 produces black patch during coping only. During control panel adjustment I have observed that + sign at four cotvers do not change to - sign when touched, although it gives beep. Also when all the signs are selected, orange light turns to green indicating all four points are selected.
    I have reloaded firmware, and data cleared. I think there must be some NVM setting which needs to be set correctly.
    Any suggestions before I start on replacing boards? Thanks in advance and best regards to all,


    Ajit
    Tags: control panel, incorrectly
    • KEVIN900
      Copier Ninja

      100+ Posts
      • Oct 2009
      • 200
      #2
      Go over the install procedure one more time. Pay special attention to the sections where you're inputting the date, and install date. It's easy to do incorrectly. And do not fail to print out every report the directions ask you to do. One step skipped over will create havoc.
      Kevin900

        Comment

        • Stirton.M
          All things Konica Minolta

          1,000+ Posts
          • Oct 2009
          • 1804
          #3
          I agree. Installation procedure has to be followed exactly with no omissions or mixing of the steps.
          Attached Files
          "Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
          ---Groucho Marx


          Please do not PM me for questions related to Konica Minolta hardware.
          I will not answer requests or questions there.
          Please ask in the KM forum for the benefit of others to see the question and give their input.

            Comment

            • mrwho
              Major Asshole!

              Site Contributor
              2,500+ Posts
              • Apr 2009
              • 4299
              #4
              True. You maybe did the installation steps twice but either you skipped something (twice) or you didn't do it by the book. Relax, have a capuccino and try it again, without any hurries.
              ' "But the salesman said . . ." The salesman's an asshole!'
              Mascan42

              'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'
              Ibid

              I'm just an ex-tech lurking around and spreading disinformation!

                Comment

                • copytechman
                  Senior Tech

                  Site Contributor
                  500+ Posts
                  • Nov 2008
                  • 926
                  #5
                  Agreed, gotta go by the book on this one... no matter how trivial the instruction may be!!

                  Regards!
                  A.

                    Comment

                    • minimerlin
                      Senior Tech

                      Site Contributor
                      500+ Posts
                      • Nov 2007
                      • 851
                      #6
                      Originally posted by copytechman
                      Agreed, gotta go by the book on this one... no matter how trivial the instruction may be!!

                      Regards!
                      A.
                      I second that!
                      Please do not PM me without asking first.

                        Comment

                        • AjitN
                          Trusted Tech

                          250+ Posts
                          • Mar 2009
                          • 287
                          #7
                          Thanks guys, I did all the installation again by book and its solved the problem. During my last try, Date & time and installed date appeared automatically ( which was very correct ) hence I have not given the input for the same. This time I have entered the details agin even if it was showing correctly & its solved, Thanks again & best regards..... AjitN

                            Comment

                            Previous template Next
                            Working...