di 3510 lines on copy. help....

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • brent
    Service Manager

    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1208
    #1

    di 3510 lines on copy. help....

    just noticed this yesterday. copier is a trade in that I did not notice before. lines on copy. I have attatched pics. I swapped drum. no change. changed dv unit. no change. this machine has no print controller so I can't test print and go around the scanner unit. what else could I check? all the gears in the back seem to be ok. I am asking for help guy's.. thanks

    brent
    Attached Files
    Tags: attatched, print controller, trade
    • brent
      Service Manager

      Site Contributor
      1,000+ Posts
      • Nov 2008
      • 1208
      #2
      just to clarify. the lines are not in the feeding direction. this is a konica minolta test chart copied from the glass in the portrait position.
      thanks. also tried to find out if this machine has a test print section. so I can see if the problem is from the ir. or the printer section
      thanks
      brent

        Comment

        • brent
          Service Manager

          Site Contributor
          1,000+ Posts
          • Nov 2008
          • 1208
          #3
          don't think about it too hard gents. I was able to solve the problem. I swapped out the sync clutch and that transport section and that the paper goes through. so problem solved.
          thanks

          brent

            Comment

            • fixthecopier
              ALIEN OVERLORD

              2,500+ Posts
              • Apr 2008
              • 4714
              #4
              Your test print will be the f-12 function. It is a sheet with lines on it.
              The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

                Comment

                Previous template Next
                Working...