Di620 prob's

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • RRodgers
    Service Manager

    1,000+ Posts
    • Jun 2009
    • 1947
    #1

    Di620 prob's

    Anyone have problems with accordin papers in the ADF? I can sometimes only get 1 sheet to go threw but it usually jams up. I'm suspecting a bur on one of the flapper gates but i just wanted to pass this by you guys to see what you think. The box has 2.1 mill on it.
    TIA.
    Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.
    Tags: 2480, 480, 4800, 800, backgrounding, change, copier, fine, glass, jam, lanier, lead edge, officially, paper, slit, start, type
    • deep
      Trusted Tech

      100+ Posts
      • Jun 2008
      • 208
      #2
      Inspect the feed tires. If they are in good form, cleaning is the first step I would do.
      Kenny

        Comment

        • KEVIN900
          Copier Ninja

          100+ Posts
          • Oct 2009
          • 200
          #3
          Great news RRoger, as of October 2009, that di620 if Officially Obsolete. Wash your hands of that old dog. Great job keeping her alive this long.
          Kevin900

            Comment

            • fixthecopier
              ALIEN OVERLORD

              2,500+ Posts
              • Apr 2008
              • 4714
              #4
              that is a kick ass machine, that is why it has over 2 mil on it. Do you have a pick mark on the lead edge? If so trace it through with your finger to feel a burr.
              The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

                Comment

                • RRodgers
                  Service Manager

                  1,000+ Posts
                  • Jun 2009
                  • 1947
                  #5
                  The paper does start to jam just past the slit glass. I'm pretty sure it's a bur on one of the gates, I've had them out already once, guess I need to take them out again.
                  Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                    Comment

                    • RRodgers
                      Service Manager

                      1,000+ Posts
                      • Jun 2009
                      • 1947
                      #6
                      Originally posted by RRodgers
                      The paper does start to jam just past the slit glass. I'm pretty sure it's a bur on one of the gates, I've had them out already once, guess I need to take them out again.
                      Turns out it was one of the flapper gates was cracked and the paper was catching on that. I'll try to post a pic. Now the copier is backgrounding. Should I just change the dev? It says it has about 69k into the PM, but... usually when a Lanier does this type of backgrounding all ya got to do it change the dev and it's fine.
                      Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                        Comment

                        Previous template Next
                        Working...