We're thinking of putting two (or more) of these machines in the field but have limited support to firmware/system software if needed. I assume I could get the KM files but the IKON might be hard to get if different. AND can boards be swapped from one machine to the other or is there a serial number match that prevents this? We deal mostly w/Sharp but have nothing to match this quality or paper handling ability so....
All of the local machines we can get our hands on are IKON label. Fiery X3eTY2-10 says the label, I believe it is the IC-303 system 8.
All of the local machines we can get our hands on are IKON label. Fiery X3eTY2-10 says the label, I believe it is the IC-303 system 8.
Comment