1201/2001 jams on C250

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • emujo
    Field Supervisor

    2,500+ Posts
    • Jun 2009
    • 3009
    #1

    1201/2001 jams on C250

    This thing's about to become an anchor..... Jams only from tray 2, LT or LT-R. might be able to get 5-10 sheets max prior to jam...
    Replaced all feed rolls, shafts, clutches, sensors, tray 2 feed motors, OACB (w firmware update) and tray pwbs with no change.
    Tried full range of loop adjustments to tray 2 with no change. Tray 1 and bypass feed fine. Any thoughts? Thanks, Emujo
    If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.
    Tags: 120, 200, 2001, 201, adjustments, bypass, c250, change, clutches, feed, firmware, firmware update, full, jams, motors, oacb, pwbs, sensors, sheets, tray, tray 2, update
    • mgutski
      #2
      just a thought, I have had a jamming issues that turned out to be a crack in the paper tray frame. replaced the tray and the jams stopped.

        Comment

        • emujo
          Field Supervisor

          2,500+ Posts
          • Jun 2009
          • 3009
          #3
          Thanks for the tip..I have not looked at this yet. Emujo
          If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            Previous template Next
            Working...