error C-1116 BH500

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • tonycalamaro
    • Jun 2025

    #1

    error C-1116 BH500

    When i turn the copier on it gives me an "error c-1116".

    could you help me please?
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299

    #2
    Here's a copy'n'paste from the manual:

    FS-510

    C-1116

    Exit roller release motor (M6) drive abnormality.

    • When the shutter is closed, the shutter home sensor (PS16) does not turn ON within a specified period of time after M6 turns ON.
    • When the shutter is open, PS16 does not turn OFF within a specified period of time after M6 turns ON.

    Check:

    Exit roller release motor (M6)
    Shutter home sensor (PS16)
    FS control board (FSCB)

    Basically it's a finisher problem. Although, without examining, it's hard to tell for sure, but you've either got something broken or out-of-place on your finisher's exit.
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


      Paul@justmanuals.com

      Comment

      Working...