Konica Minolta bizhub 252 is not loaded to the system at startup

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • ozkan
    replied
    Re: Konica Minolta bizhub 252 is not loaded to the system at startup

    Hi I have the same problem, but I couldn't find the firmware. Any suggestions?

    Leave a comment:


  • Naveed Shahid
    replied
    Re: Konica Minolta bizhub 252 is not loaded to the system at startup

    Originally posted by LinART
    I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM
    can u send me solution i am also facing same problem

    thanks
    naveed
    toshiba_estudio@yahoo.com

    Leave a comment:


  • radew
    Guest replied
    Konica C252 nvram problem

    Dear All,

    I also have the similar problem and been trying to program the copier without any success despite with the technician from the local copier company ..

    I will be grateful if someone could give me a pointer ?

    Cheers,
    Mao

    Leave a comment:


  • LinART
    Guest replied
    Originally posted by xsstaff
    hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!
    I solved the problem with NVRAM recovery firmware bizhub C250/C252. I can share. Contact with PM

    Leave a comment:


  • xsstaff
    Guest replied
    hi there! please tell me if you managed the situation... i'm in the same position, and i can't find the nvram recovery for bizhub c252. if you need, i have the firmware you requested. thanks!

    Leave a comment:


  • LinART
    Guest replied
    Originally posted by RRodgers
    Try a trouble reset first. Turn the machine on while holding down the Utility key.

    It did not help.

    Leave a comment:


  • RRodgers
    replied
    Try a trouble reset first. Turn the machine on while holding down the Utility key.

    Leave a comment:


  • Konica Minolta bizhub 252 is not loaded to the system at startup

    Konica Minolta bizhub 252 is not loaded to the system at startup. The screen shows a clock, then fades out the screen. I suspect that the problem with NVRAM. Now I want to write the firmware from the CF ... But I can not find it. Anyone can send an e-mail admin@sadmin.org firmware for 252p, for example, 4038-F000-G00-K0-300_CHECKSUM-6452 (Phase 3.05)? Or NVRAM recovery firmware bizhub C250/C252: 20070301_4038-F000-GCN-G4-000 (2000), Checksum: 16E6.EXE. Thank you.
Working...