good idea for C350 first drawer

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • connecticcut
    Technician
    50+ Posts
    • Feb 2010
    • 53
    #1

    good idea for C350 first drawer

    to avoid stumbling jams with the paper thick3 10pts, install a Feed Ricoh copier on minolta copier (first drawer).
    I take cahoutchouc a feed (first drawer Ricoh 1224C). After removing (cutting it) big cahoutchouc minolta, I slide on the hub minolta feed Ricoh (easy to install after having doused with alcohol ). It is a little longer than the minolta but this does not alter the deranged operation.
    Your customers will thank you and will be able to use the thick3 without apprehension (to print the business card ).
    Last edited by connecticcut; 06-06-2010, 04:25 PM.
    Tags: 122, 1224c, alter, big, business, c35, c350, cards, copier, customers, cut, drawer, feed, good, hub, install, jpg, minolta, operation, paper, recycle, ricoh, slide, stall, thick, thickness, top
    • viva
      #2
      Good help

      That is nice trick ! I am going to try it. Thanks for it !



      ________________________
      www.vivaprint.cz

        Comment

        • blackcat4866
          Master Of The Obvious
          Site Contributor
          10,000+ Posts
          • Jul 2007
          • 22599
          #3
          Originally posted by connecticcut
          ... big cahoutchouc minolta,...
          ...cahoutchouc?
          If you'd like a serious answer to your request:
          1) demonstrate that you've read the manual
          2) demonstrate that you made some attempt to fix it.
          3) if you're going to ask about jams include the jam code.
          4) if you're going to ask about an error code include the error code.
          5) You are the person onsite. Only you can make observations.

          blackcat: Master Of The Obvious =^..^=

            Comment

            • mascan42
              Trusted Tech
              250+ Posts
              • Oct 2008
              • 458
              #4
              Originally posted by connecticcut
              I take cahoutchouc a feed (first drawer Ricoh 1224C). After removing (cutting it) big cahoutchouc minolta, I slide on the hub minolta feed Ricoh (easy to install after having doused with alcohol ).

                Comment

                • Rudi
                  Technician
                  250+ Posts
                  • Jun 2007
                  • 251
                  #5
                  Originally posted by mascan42
                  LOL !!!!
                  Thanks for the nice tip connecticcut.

                    Comment

                    Previous template Next
                    Working...