If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
When sent through as a print, it is off by about 1mm. When you run it through the adf it moves about 4 to 6 mm more. I tried adjusting the centering, but when I set it for the ADF, it is off from the glass by about 5 or 6. Any ideas?
The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking
