Konica 7145 printing code

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • copytechman
    Senior Tech

    Site Contributor
    500+ Posts
    • Nov 2008
    • 926

    #16
    Not necessarily, they'll accept jobs from port 9100 (raw) as well if its enabled iirc.. I have used PORT or PORT1 with lpr though on occasion.

    Regards!
    A.

    Comment

    • ejaboneta

      #17
      Originally posted by mrwho
      Well, I'm temped to give him the necessary tools for updating the firmware - now that the machine is working, maybe he'll brick it and we get some good laughs.

      It's not exactly working, but hey, if only just for laughs, go right ahead!

      Comment

      • mrwho
        Major Asshole!

        Site Contributor
        2,500+ Posts
        • Apr 2009
        • 4299

        #18
        Originally posted by ejaboneta
        It's not exactly working, but hey, if only just for laughs, go right ahead!
        Just remembered that KM's firmwares are area-based. So, unless your machine is European, my firmware probably won't do any good to you.
        If you want it anyway, just say so - I'll send it to you on the condition that you'll post a video of the bricked machine on Youtube.
        ' "But the salesman said . . ." The salesman's an asshole!'
        Mascan42

        'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

        Ibid

        I'm just an ex-tech lurking around and spreading disinformation!

        Comment

        • ejaboneta

          #19
          Thanks... but maybe I'll skip your offer. Anyone with the right firmware, I'll promise pictures, videos, whatever!

          Comment

          • ejaboneta

            #20
            Well if I can't get the firmware to do it myself, what's the best way to find a tech who can do it for me? We're in the San Francisco California bay area. Konica won't do anything without a service contract and our usual tech doesn't seem to know anything about it so i need to find someone new.
            Last edited by Guest; 08-31-2010, 12:08 AM.

            Comment

            • ejaboneta

              #21
              I'm getting pretty desperate. I don't have access to the firmware to do it myself and I can't find anyone to do it. Any help would be much appreciated...

              Comment

              • RRodgers
                Service Manager

                1,000+ Posts
                • Jun 2009
                • 1947

                #22
                Just set it up to print using the HP driver. Poof it prints.
                Color is not 4 times harder... it's 65,000 times harder. They call it "TECH MODE" for a reason. I have manual's and firmware for ya, course... you are going to have to earn it.

                Comment

                • ejaboneta

                  #23
                  That would defeat the purpose of buying it in the first place...

                  Comment

                  Working...