Started out with c-4716 code. Moved suspect laser but the problem did not move. Tried different Image Control board, Printer Control Board and interface board. No help. After putting everything back together we started getting random c-47xx codes immediatly after copier starts warmup. Can't seem to get any of the polygon motors to run in I/O mode.
-
-
tries to read the field manual, the troubleshooting item.
I'm going, maybe now is Stirton.M or Horse, they like to spend hours here talking.
See Later.
Good Luck. -
-------------------------OK Five Munite.----------------------------------
Konica Minolta Bizhub Pro C6500 SC -4722/4723/4724/4725.
Cause:Connection Abnormality Between Index Board/Y,/M,/C,/K (INDEXB/Y,/M,/C,/K) or the laser Drive Board Y,/M,/C,/K (LASDB/Y,/M,/C,/K) and the image process Board (IPB)
Relevant Parts: Image Prossesing (IPB), Write Unit /Y/C/M/K.
------------------------------------------------------------------------------
Tal Parece que algo quedo mal conectado Pay, trata de revisar que carajo quedo desconectado.Comment
-
According to the TSB/TAD
the only code found there was the 4725
CAUSE: DCPS 1 has failed.
SOLUTION: Replace DCPS 1 (p\n A03UM40201)."Many years ago I chased a woman for almost two years, only to discover that her tastes were exactly like mine: we both were crazy about girls."
---Groucho Marx
Please do not PM me for questions related to Konica Minolta hardware.
I will not answer requests or questions there.
Please ask in the KM forum for the benefit of others to see the question and give their input.
Comment
-
Re: bizhub pro c6500 c-4724, c-4723 c-4725 c-4722 codes
He probably figured that out 12 years ago when he posted
We know a thing or two because we've seen a thing or two.
The medication helps though...Comment
Comment