Bizhub C650.

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Imsdal
    Trusted Tech

    100+ Posts
    • Aug 2009
    • 111
    #1

    Bizhub C650.

    Well, the problem with this machine was that the developer from the IU black was leaking.
    Do I need to do something else to this issue, and this is not the only machine I have 2 more with the same issue.
    Can anybody help me with this problem.
    Sincerely

    David
    Tags: belt, bizhub, c650, color, firmware, leaking, p14, prcb, registration, time, transfer
    • copytechman
      Senior Tech

      Site Contributor
      500+ Posts
      • Nov 2008
      • 926
      #2
      There's a version of R5 firmware (GC1_22) that dealt with p14 codes, I've used it on one machine and it worked great but I'm not sure if you can fall back to R5 from R6 or not tho. Someone with more experience than I may know though.

      Regards!
      A.

        Comment

        • DCPS
          Trusted Tech

          100+ Posts
          • Mar 2008
          • 116
          #3
          The FW (GC4-22) will flash only the PRCB and not the whole machine (it's about 5Mb) so it's no problem about version R6 or R5 and it really solves the P-14 warning.

            Comment

            Previous template Next
            Working...