[Misc] How to disable the saddle stitch / booklet maker on bizhub c-352

[beatbrother]

As mentioned above I removed the saddle stitcher from the finisher and now the machine tells me to "close the door from the saddle stitch" which there is none!!!

So I suppose the is an enable/disable switch/function on the Tech Rep Mode

Does anyone have had this issue ????
Please... HELP! I need some bodie, HELP! ♪♫♫♪ Lol

Thanks in advance!!!

[emujo]

although you can disable the saddle stitcher in service mode, I believe the MFP needs to see the saddle sticher at least present, meaning re-install then disable. Emujo

[beatbrother]

That's a great!!
Do you know how can I disable it once I put it back or in what menu I can Do it??

Thank you Sir.

[emujo]

look in service mode, systm 1, isolation..maybe on page 2, but look for saddle stitch and put on set, cycle power. Emujo

[beatbrother]

Hi Emujo.

I will follow your instructions and I'll let you know what happened ;-)

Thank you (Y)

[SmellsHot]

Follow the installation instructions for the saddle stitcher. You prolly forgot to take out the guide and connector thats in the finisher horizontal conveyance section!

[beatbrother]

HELLO Emujo and SmellsHot.

I did Not found anything on SYSTEM 1 or 2 in the service mode related to Isolation or Saddle Stitch. Can you tell me exactly what menu should go to?? Please

I also made sure I did not leave any bracket or wire left behind. I actually COMPARED 2 same finisher and they seem just the same in the connectors and the finisher board.

I really need help!!!
Thank you guys!!

[habik]

Have you checked the punch unitsection? not sure if you have it but that is what I had, disabling wont help as the machine still has connetcted something from the saddle range. As SmellsHot says check out the horizontal conveying path. or have a look in the Install manual in revers order what is missing to detach or unplug.

[emujo]

Sorry, looks like the C352 is prior to the "isolation" capability. We don't see much before the 353 series. Emujo

[habik]

aww sorry dude..I have missread thought you have c 353..it should not be that far off c352.

[EarthKmTech]

the crease unit also needs to be unplugged too, if youve thrown out the original guide that goes in its place it'll need to stay in there unplugged.

[beatbrother]

Hello Emujo and Habik.

I do not have a puncher section on the copier.
I followed the harnesses wire from a copier with NO booklet maker and another one WITH booklet make and they are exactly the same.
Actually the one with NO booklet maker it has the connectors for the booklet maker ready just to plug and play I suppose.
What I am going to do is to put the booklet maker in the finisher with NO booklet maker just for FUN PURPOSES. may be I can discover something!
Hopefully I do not end up with 2 MACHINES ASKING FOR A BOOKLET MAKER Lol.

I do not have the installation manual for the booklet maker but any help would be infinitely appreciated

[beatbrother]

HELLO PerthKMTECH.


The crease unit comes with the Booklet maker unit, I remove it as well.
I am frustrated man :''-(
Any help will be paid double by Karma.

Thank you

[beatbrother]

No luck Guys :''-(

Please help

[mmru4real]

If it is the standard canon finisher I am thinking of, I believe this come standard with that finisher and is not just an option.