Which is which?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ukyo
    Technician

    50+ Posts
    • Aug 2008
    • 51

    #1

    Which is which?

    Hi all..

    Which of this 2 brands is good for personal, moderate & heavy use? Konica Minolta/Develop or Kyocera?
  • richd
    Technician
    • Aug 2009
    • 49

    #2
    BW or Colour ? And cpm ?

    Comment

    • ukyo
      Technician

      50+ Posts
      • Aug 2008
      • 51

      #3
      Re: Which is which?

      BW, colored & any range of the cpm.. As long as it's for personal, moderate or heavy use.

      Comment

      • KenB
        Geek Extraordinaire

        2,500+ Posts
        • Dec 2007
        • 3945

        #4
        Re: Which is which?

        A little open ended, don't you think?
        “I think you should treat good friends like a fine wine. That’s why I keep mine locked up in the basement.” - Tim Hawkins

        Comment

        • richd
          Technician
          • Aug 2009
          • 49

          #5
          All konica minolta current colour good, bw low volume not so good, 60 cpm and above good.
          Kyocera low to mid volume good, both color and bw.

          Develop is same as KM .

          Comment

          • zaza
            MECANOGRAPHE

            1,000+ Posts
            • Mar 2008
            • 1095

            #6
            Re: Which is which?

            each copiers have her specification ...speed of paper or her technical system ...in my opinion this three kinds all is better each brand have her advantage ..
            BEST TECHNICIAN . NICE PEOPLE .

            Comment

            • ukyo
              Technician

              50+ Posts
              • Aug 2008
              • 51

              #7
              Re: Which is which?

              all i know is that kyocera is only good in personal use.they have A4 size copiers that have high speed but the drawback is that the machine & toner is expensive compared to develop.

              Comment

              • blackcat4866
                Master Of The Obvious

                Site Contributor
                10,000+ Posts
                • Jul 2007
                • 22930

                #8
                Re: Which is which?

                It sounds like you've already made a decision.

                I think Ken is asking what kind of tasks do you have in mind for this machine? You haven't really given us anything to go by.
                I happen to disagree about Kyo only being good for personal use. I have an CS-8030 that's done 500K in 4 weeks.

                So I'll ask. What kind of tasks do you do? How may prints per month? And which models do you have in mind to perform these tasks? Would you like us to make some model recommendations, when you provide a basis for a recommendation? =^..^=
                If you'd like a serious answer to your request:
                1) demonstrate that you've read the manual
                2) demonstrate that you made some attempt to fix it.
                3) if you're going to ask about jams include the jam code.
                4) if you're going to ask about an error code include the error code.
                5) You are the person onsite. Only you can make observations.

                blackcat: Master Of The Obvious =^..^=

                Comment

                • fixthecopier
                  ALIEN OVERLORD

                  2,500+ Posts
                  • Apr 2008
                  • 4714

                  #9
                  Re: Which is which?

                  The Konica machines are solid as a rock. I have a Bizhub 600 doing 6000 a day and has for 3 years, and the same people are pushing 1 to 2000 a day through a Bizhub 250 and a pair of 200's each doing 1,000 a day.
                  The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

                  Comment

                  Working...