Fiery X3e System Software CD

[JustManuals]

Re: Fiery X3e System Software CD

1st post and need need need...........

[vini234]

Re: Fiery X3e System Software CD

1st post and need need need...........

Hi friends.

hello friends.


I need your help, is urgent.
I have a Konica Minolta 7832 and I have the pass for access
the machine, as I suppose it will be impossible to get the keys to enter
in Command WorkStation, systema need the software (I think it is the fiery x3e), to charge, but not as loaded into the machine. I hope you can help me.


My email is: imprenta_breogan@hotmail.com


Thanks to all

[Darv]

Re: Fiery X3e System Software CD

Uh oh....

I have a KM - C351 and the Fiery Controller will not boot. It gets to....

LILO 22.2 Loading linux-ext2.........
Uncompressing Linux OK, booting the Kernel.....

That's as far as it gets.

I'm assuming I need to re-install the software but don't have any disks etc.

Does anybody have a copy they can let me have?

Many thanks.....

Darv

[Kicouarnoo]

Re: Fiery X3e System Software CD

Hello,

i'm french excuse my english.
I have a konica minolta 7915 cf1501 fiery x3e with "no boot device".

I have a good level in computer science and must have an IDE 2.5 HDD to replace if necessary.

I do not contribute and ask I am sorry.

I would not like to throw this copier for a dead firmware or hdd it's been months since I try to find a solution you are my last chance!

Can you help me ?

Thank you.

[Synthohol]

Re: Fiery X3e System Software CD

I'm pretty sure I ha e boot.efi and system.efi which are the files needed to reload that fiery.
Only thing is you need a lpt to scsi cable to do it.
If you don't have one or a laptop with a printer port (not usb) your situation is at a standstill.
Back in the day I did almost 1 a week for failed fiery software.
He'll I may even have an old 3102 fiery in my basement. I'll look when I get home but I think I tossed the cable needed to do the install.
It's funny this came up, I found a new fuser for a 1501/2001 in my basement just this morning!!

Good luck finding the script cable, let me know.

[Darv]

Re: Fiery X3e System Software CD

Hello,

i'm french excuse my english.
I have a konica minolta 7915 cf1501 fiery x3e with "no boot device".

I have a good level in computer science and must have an IDE 2.5 HDD to replace if necessary.

I do not contribute and ask I am sorry.

I would not like to throw this copier for a dead firmware or hdd it's been months since I try to find a solution you are my last chance!

Can you help me ?

Thank you.

I still have the copier. Do you want the HDD? I'm not sure if it's any good.