c351. c2152 error

[mrfuser]

C351. C2152 errorThis error won't clear. Swapped belt, still have error. Tried open close door, power down, still won't.clear. any ideas?ThanksKelly

[JustManuals]

Re: c351. c2152 error

This Parts & Service manual can be purchased for $12.77 and downloaded immediately after payment from

http://www.justmanuals.com

Paul@justmanuals.com

[Ianizer]

Re: c351. c2152 error

Perform Trouble Reset.

You know- The power on while doing the thing with the thing?
Touch the thing, see deal, do it again. Poof! Worky-worky.

That, or you left some tape on the Xfer belt.
In which case you need to do the thing with the deal anyway.

HTH
-I

[SPBE]

Re: c351. c2152 error

Perform Trouble Reset.

You know- The power on while doing the thing with the thing?
Touch the thing, see deal, do it again. Poof! Worky-worky.

That, or you left some tape on the Xfer belt.
In which case you need to do the thing with the deal anyway.

HTH
-I

Yeah, what he said.

[rprem]

Re: c351. c2152 error

hi
have u checked the sensor on the right side of the transfer belt it must be problem,or otherwise install transfer belt and dont put both the screw just put one screw on the right side and close the door and check it

[mrfuser]

Re: c351. c2152 error

Sensor on rear wall of copier where the transfer belt slides into was completely coated with toner. Cleaned it off and works fine.

Thanks all!

Kelly

[1FRY1]

Re: c351. c2152 error

Just deleted it as I see youv'e fixed it

[Ianizer]

Re: c351. c2152 error

Sensor on rear wall of copier where the transfer belt slides into was completely coated with toner. Cleaned it off and works fine.

Thanks all!

Kelly

Another stone-cold frikkin copier guru saves the day!
You RAWK, Mr. What a maniac.

High-fives and Rockstars all around.

Dontcha just love it when you're right?

-I