[Error Code] Konica c451 with IC409

[Guest]

I recently reload system code via USB on the IC409. Applied suggested patches.
Under Utility/Counter>Controller Details, I get the following message:

Maitenance
Requried D-1

Does someone know what that message means? I haven't been able to find anything on it.

Thanks

[Mr Spock]

Re: Konica c451 with IC409

I can not find it but will suggest clearing the cmos of fiery and making sure you made the thumb drive correctly.

[Cay]

Re: Konica c451 with IC409

I will try clearing the cmos.
FYI, this message did not appear right after the system reload. It took a couple of days before it showed up.

Thanks

[scottybbb]

Re: Konica c451 with IC409

D-1 is a warning code or P-code telling you to clean the slit glass.Check under counters in service mode.

[Cay]

Re: Konica c451 with IC409

D-1 is a warning code or P-code telling you to clean the slit glass.Check under counters in service mode.

Thanks Scottybbb, that was it. I assumed it was a fiery code. If I had opened Command WS it probably would have made it more obvious to me.

Thanks again.