I recently reload system code via USB on the IC409. Applied suggested patches.
Under Utility/Counter>Controller Details, I get the following...
9 results in 0.0100 seconds.
-
Konica c451 with IC409
-
MX4100 - Not printing or scanning
Hi All, a bit of a weird one.We have an MX4100 where recently it stopped printing and scanning. There is no link light on the network board. We switched... -
New Machines comming out
has anyone found out how the new machines will look like? I hear its a total new
design. The paper exit will be to the right of the machine rather... -
Bizhub 350 Maintanence Mode
Hi,
Im trying to clear out the PC counter on a bizhub 350. Not that familar with this machine. I know how to get into service mode but I... -
KM 4850
Has anyone come across a KM4850 when copying or Scanning displays
Memory Full and pulls in the original only about 10mm ,It spits out a blank sheet... -
FS1118 lock up
I have an FS1118 when switched on goes into warm up, fuser works, fans drive and main drive all work. The problem is that boot up screen freezes about... -
Clearing the MK message on a Kyocera FSC8100
I've just fitted maintenance kit A on a Kyocera FSC8100, but don't know how to clear the MK message on the control panel, can somebody please help! -
AR-203E indicators
We hav dis sharp 203E on our customer, it shud be d "initial" replacements of new DRUM KIT and developer. prior to that, the maintenance indicator... -
Not really on topic but curious
I work for a company that was recently acquired by Xerox (Global Imaging). I have not been trained on any xerox equipment as of this writing and as far...
