About Efi Fiery Controller (IC-306)

[gurko_gg]

Hello,

I have ic-306 Ver 2.0 controller


But i lost System and User Software CDs

Anyone help me about Cd images

Regards.

[pepper38_cnd]

Re: About Efi Fiery Controller (IC-306)

You will need the ISO V1.1 then Patch to V2.0

[gurko_gg]

Re: About Efi Fiery Controller (IC-306)

i can find v1.1 CDs.

But i havent V2.0 patch Cd.
we upgraded V1.1 to V2.0 (its came a pack)
Cds in the pack but i didnt find the pack.

Ru send to me V2.0 Patches?

Regards.

[gurko_gg]

Re: About Efi Fiery Controller (IC-306)

i inserted system software cd (V1.1) to ic-306 for format.

ic306 say to me "This DVD not support at this platform."

[oxident]

Re: About Efi Fiery Controller (IC-306)

It would be great if anyone could share the 2.0 update patch. I also lost the CD ... but my BIOS is already upgraded :-(

[oxident]

Re: About Efi Fiery Controller (IC-306)

Okay, forget about my last post. Found the DVDs again... Anyway: There was no "update patch". It was a complete re-install using system image 2.0

[Mick01]

Re: About Efi Fiery Controller (IC-306)

In regards to the "patch" files. I would remote into the Fiery and update using the update utility. This will ensure you have all the latest patches installed.
The fiery needs to have "internet access". Once you open the utility there is a "check now" button. You can also set up auto downloading and installation of new patch files when they are available.

[oxident]

Re: About Efi Fiery Controller (IC-306)

Yes, but in this case, it's a paid patch (Sys 9 to 9R2) which isn't available on EFI's site.

[Mick01]

Re: About Efi Fiery Controller (IC-306)

Hi,
I am trying to understand what you are referring to. The upgrade from Version 1.1 to version 2.0 is not a "patch" upgrade. It is upgraded using a single use dongle and installing extra memory inside the IC-306, once this upgrade occurs you cannot go back to version 1.1 as it updates the bios. If you need to reload the system software it will only take the version 2 system disk.

[oxident]

Re: About Efi Fiery Controller (IC-306)

Yes, that's exactly what I wanted to say

[zunamiwave]

Re: About Efi Fiery Controller (IC-306)

You will need the ISO V1.1 then Patch to V2.0

Hi I wanted to know if you have an image you can share with me on this. The software I have would not boot up no more or get an error once its tries to boot. Would it possibility if you can share the image if you dont mind?

I would appreciate the help.

[jpablo_mza]

Re: About Efi Fiery Controller (IC-306)

Dear, I need the version 2.0 of that fiery (Pro80), I lost the discs and xp does not start, someone will have the images ?? Thank you very much for your help

[sisirakj]

Re: About Efi Fiery Controller (IC-306)

do eny one has Konica fiery IC-306 system software

- 45122757 v3.01 System Software 1
- 45120171 System Software 2 disc that came with v3.0 upgrade kit
- 45120172 System Software 3 disc that came with v3.0 upgrade kit
- 45122758 v3.01 User Software
- Windows 7 Product Key that came with v3.0 upgrade kit

[Synthohol]

Re: About Efi Fiery Controller (IC-306)

i sent a PM with what i had to help.
hope it helps!

thanks for being a contributor!