Bizhub c351 fuser

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • trektech
    Technician
    • Dec 2007
    • 45
    #1

    [Dead] Bizhub c351 fuser

    Fusers are on back order from my sources.
    i know there has been threads on this before but I would like to ask if anyone out there has a pressure roller for this machine or know where to get a fuser assembly.
    Tags: None
    • fixthecopier
      ALIEN OVERLORD

      2,500+ Posts
      • Apr 2008
      • 4714
      #2
      Re: Bizhub c351 fuser

      Originally posted by trektech
      Fusers are on back order from my sources.
      i know there has been threads on this before but I would like to ask if anyone out there has a pressure roller for this machine or know where to get a fuser assembly.


      My shop has 2 brand new OEM fusers in the box, $350 each, she may cut a deal if you want both.
      The greatest enemy of knowledge isn't ignorance, it is the illusion of knowledge. Stephen Hawking

        Comment

        • kinsman
          Technician
          • May 2008
          • 42
          #3
          Re: Bizhub c351 fuser

          Originally posted by trektech
          Fusers are on back order from my sources.
          i know there has been threads on this before but I would like to ask if anyone out there has a pressure roller for this machine or know where to get a fuser assembly.
          I have one in stock, let me know if you still need it then we can negotiate the cost & shipping.

            Comment

            • trektech
              Technician
              • Dec 2007
              • 45
              #4
              Re: Bizhub c351 fuser

              Originally posted by kinsman
              I have one in stock, let me know if you still need it then we can negotiate the cost & shipping.
              Hey thanks,

              I did resolve the need for a fuser back then but have held onto the core in hopes of finding parts to rebuild.
              Do you mean to say you have a fuser or the pressure roller?
              In either case, what do you want to charge?

                Comment

                • kinsman
                  Technician
                  • May 2008
                  • 42
                  #5
                  Re: Bizhub c351 fuser

                  Originally posted by trektech
                  Hey thanks,

                  I did resolve the need for a fuser back then but have held onto the core in hopes of finding parts to rebuild.
                  Do you mean to say you have a fuser or the pressure roller?
                  In either case, what do you want to charge?
                  I will do free shipping to any of the East Coast/Atlantic states: it's only for $386.00. Its the whole unit. Let me know what you think. Thanks a bunch
                  Ed

                    Comment

                    • blackcat4866
                      Master Of The Obvious

                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22997
                      #6
                      Re: Bizhub c351 fuser

                      The aren't any individual parts available for this fuser from Konica Minolta (or anyone else that I know of). I do have a scrap C451 fuser that has an open thermal switch. If you want all or part of it please let me know via private message. I'm sure we can work out a value fair for both of us.

                      =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        Previous template Next
                        Working...