Konika Minolta BizHub 163 - Error Code? M2

[Smiley27]

Re: Konika Minolta BizHub 163 - Error Code? M2

Error is cleared. Machine works now, I am suppost to replace drum since it made 40000, but drum is fine...

If I want machine to make another ''?????'' what counters do need to be clear? I already deleted ''Supplies Counter'' , but I am afraid machine will stop again if another counter reaches its limit..

So I got :

MEMORY COUNTER
TOTAL COUNTER
PM COUNTER
MAINTENANCE COUNTER
SUPPLIES COUNTER ( CLEARED )
APPLICATION COUNTER
SCAN COUNTER
MISFED COUNTER
PAPER SIZE COUNTER

Also, should I set IU life stop mode to : continue ( its on STOP now )


Also,give me a clue what exactly ''developer'' is? drum?

[Gaffers01]

Re: Konika Minolta BizHub 163 - Error Code? M2

press the Utility button,
then Stop → 0 → 0 → Stop → 0 → 1

then scroll to Clear Data, and then Supplies Data and clear.

You must be aware that clearing this counter clears the drum, developer and other counters.

Which are very important for copy quality, and not replacing them may cause more harm than good.

[Smiley27]

Re: Konika Minolta BizHub 163 - Error Code? M2

I am fine with that, but , how to enter service mode ? Someone mentioned turning machine off/on and hold STOP.. Whats up with that?

M2

[Gaffers01]

M2

[Smiley27]

Machine gives me this error message, what does it mean ?


Thanks.


Found out ! Its maintenance, but how do clear this message? Friend of mine mentioned ''dataclear'' but I dont know...