No Animation Guide Data Available on bizhub C360

[copier tech]

Re: No Animation Guide Data Available on bizhub C360

Hi everyone,

Someone can help me, I'm looking for the Movie animation file for a C280.
I have no access to Konica service site.
After format the hdd, I have message "No data movie animation"

Best Regards.

Drop us an email we can supply it for you.

Firmware Update - Printer & Copier Firmware

Or as other have suggested contribute to this site & they may send you it.

[Schumy42]

Re: No Animation Guide Data Available on bizhub C360

Drop us an email we can supply it for you.

Firmware Update - Printer & Copier Firmware

Or as other have suggested contribute to this site & they may send you it.

[copier tech]

Re: No Animation Guide Data Available on bizhub C360

Hi,

This site is generally for technicians not end users.

However you will find should you donate to this site you may find the techs more accommodating & they'll send you any files you need.

[tsbservice]

Re: No Animation Guide Data Available on bizhub C360

Hi,

This site is generally for technicians not end users.

However you will find should you donate to this site you may find the techs more accommodating & they'll send you any files you need.

Agree. You can also contact copier tech site and purchase needed.

You can choose from some options:
1. Pay Frenchman KM tech to come do it for you.
2. Source it here.
3. Find it somewhere in the internet.

Should you insist on that you need to receive FW(movie data) free and now, good luck you definitely will start receiving red cards(mine is just pending).

[emujo2]

Re: No Animation Guide Data Available on bizhub C360

\


If a KM trained tech needs help and firmware is recommended , that tech can access the firmware and try it..That is mainly what this site is about..Vendor trained techs helping other vendor trained techs..We are not here to supply end users with firmware, parts books, service manuals, passwords ect..(although some do). Go pound sand with your opinions. E

[Phil B.]

Re: No Animation Guide Data Available on bizhub C360

to ask for COPYRIGHT FILES/SOFTWARE is a violation of CTN forum rules : https://www.copytechnet.com/forums/misc.php?do=vsarules

you are a newbie here who CLAIMS to be a tech, with NO supporting info posted in your profile.

3 posts (mostly in this thread) and now you cop an attitude because you can't get what you want.

as others have stated this forum/site it to help TRAINED techs out with their problems.

a small donation to CTN: https://www.copytechnet.com/forums/v....php?do=donate

will more than likely get you what you desire, but with your COMPLAINING about having to pay makes you sound more like an end-user and not a fellow tech.

we get a lot of liars and frauds here so we have become very wary of people like you.

E said it all 'go pound sand'

and congrats I am not as forgiving as Tsbservice you have pushed your luck.

[tsbservice]

Re: No Animation Guide Data Available on bizhub C360

to ask for COPYRIGHT FILES/SOFTWARE is a violation of CTN forum rules : https://www.copytechnet.com/forums/misc.php?do=vsarules

you are a newbie here who CLAIMS to be a tech, with NO supporting info posted in your profile.

3 posts (mostly in this thread) and now you cop an attitude because you can't get what you want.

as others have stated this forum/site it to help TRAINED techs out with their problems.

a small donation to CTN: https://www.copytechnet.com/forums/v....php?do=donate

will more than likely get you what you desire, but with your COMPLAINING about having to pay makes you sound more like an end-user and not a fellow tech.

we get a lot of liars and frauds here so we have become very wary of people like you.

E said it all 'go pound sand'

and congrats I am not as forgiving as Tsbservice you have pushed your luck.

😁 Hey Phil, one of the best posts recently to read. You've covered everything Brother.

[Phil B.]

Re: No Animation Guide Data Available on bizhub C360

😁 Hey Phil, one of the best posts recently to read. You've covered everything Brother.

Thanks Brother,

If you think this one was good please go read this one: New users ( tech and end users ) breaking forum rules ( #5 mainly )

I am getting tired of non-techs and newbies thinking they are entitled to this info we have bled .. sweated.. pulled hair out (some of us can't afford this) to attain.

It really galls me on the attitude some of these pukes have ... note the muther in this thread that copped a major tude when he was turned down.

Thanks again and I hope we ALL get on the page about violating forum rule #5. This could get a 'kind' tech the loss of his tech ID and his company to lose the right to sell the product.

Lets ALL do our part to stop the flow of 'free files/manuals' floating around.

end of rant

[Xehe]

Re: No Animation Guide Data Available on bizhub C360

Hi,

I donated a c454e from my company to a dog rescue center. But after resetting the printer it wont print for them. So i went there to try helping them. It say " no animation guide data available", but it should be able to print anyway right? Or is it something that might be failing and it wont show whats wrong thanks to the guide is inactive?

In the "joblist" it only say stop after the job.

My english isnt the best but i hope you guys understand.

Tanks in advance.

[tsbservice]

Re: No Animation Guide Data Available on bizhub C360

Who and how did reset machine? No animation guide warning usually is harmless to machine functionality. You will need FW update to clear this warning.

[Xehe]

[copier tech]

Re: No Animation Guide Data Available on bizhub C360

Hi,

Sounds like you have user authentication or account track turned on, have a look in administrator settings & check both are off.

Also if one of the drums/fuser or transfer belt have reached life the machine won't print. Press utility & check the consumable life counter.

When your IT guy did the all clear he deleted the animation file, drop us an email we can supply this for you, this warning could be masking another one stopping you from printing.

Firmware Update - Printer & Copier Firmware

[Xehe]

Re: No Animation Guide Data Available on bizhub C360

Hi,

Im pretty sure i checked the user and account thing. And allowed everything. But i will check again.

The support was out and reseted the transfer roller. They didnt change it tho. Was a warning on transfer roller life. But it worked after. Can it be that one thats Messing up now? There is no warning of it now.

i will have to set up a PayPal first.

[copier tech]

Re: No Animation Guide Data Available on bizhub C360

Hi,

Im pretty sure i checked the user and account thing. And allowed everything. But i will check again.

The support was out and reseted the transfer roller. They didnt change it tho. Was a warning on transfer roller life. But it worked after. Can it be that one thats Messing up now? There is no warning of it now.

i will have to set up a PayPal first.

That transfer roller message may well be the reason you couldn't print.


You don't need to set up a Paypal account to purchase from us, I believe you can simply make a one off payment via card.

[Xehe]

Re: No Animation Guide Data Available on bizhub C360

That transfer roller message may well be the reason you couldn't print.


You don't need to set up a Paypal account to purchase from us, I believe you can simply make a one off payment via card.

So even i they reset the roller warning. And it worked until we moved it over there? There is no message now.

My first thought was FW. Or user access.

On my company it was IT desk who fixad everything and it was strict who was allowed to print etc.
And it worked flawless before they reseted it.

i will go over there tomorrow and give it a go again. Feel bad that i gave them a non working printer when i thought i was helping out.


Thanks for helping out btw.