C250 Manual Feed Issue

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ck1
    Trusted Tech

    250+ Posts
    • Apr 2008
    • 485

    #1

    [Misc] C250 Manual Feed Issue

    I have one C250 manual feed can't detect or no respond at all when put paper at try . any idea ?
    i have try change the P/sensor and clean the sys error data clean still this problem .
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9838

    #2
    Re: C250 Manual Feed Issue

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

    Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

    Paul@justmanuals.com

    Comment

    • morpk
      Technician

      50+ Posts
      • Oct 2010
      • 97

      #3
      Re: C250 Manual Feed Issue

      When you changed the sensor did you take apart the manual feed unit / disconnect the wires it has been a while since i have done this but you might have one of the wires in the wrong spot.


      I could be wrong though you might get a service error if that was the case but maybe double check.

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22997

        #4
        Re: C250 Manual Feed Issue

        Does this machine auto-detect the 5 or 6 standard paper sizes from the manual feed bypass? On the newer machines if the paper size adjustment is done wrong or out of adjustment, the machine will never attempt to take the paper. It won't even recognize that paper is in the tray. Just an idea. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        • mo0651
          Service Manager

          1,000+ Posts
          • Apr 2009
          • 1054

          #5
          Re: C250 Manual Feed Issue

          When you touch the auto-paper tab on touch screen, Is the manual tray showing ??? marks? You can do the tray adjustment and see if it changes. I have had to replace the reostat before.

          Comment

          • ck1
            Trusted Tech

            250+ Posts
            • Apr 2008
            • 485

            #6
            Re: C250 Manual Feed Issue

            Originally posted by mo0651
            When you touch the auto-paper tab on touch screen, Is the manual tray showing ??? marks? You can do the tray adjustment and see if it changes. I have had to replace the reostat before.

            No it show you paper size you setting , but when paper empty still show have paper.

            Comment

            Working...