bizhub 420 regarding OACB and counter

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • enygma
    Technician
    • Aug 2009
    • 17
    #1

    bizhub 420 regarding OACB and counter

    Hello,

    I have just replaced a new Overall Control Board on bizhub 420. My problem now is that the counter (from the board) is not match to the mechanical counter. Is there a way that i could synchronize the counters? Thank you.
    Tags: None
    • blackcat4866
      Master Of The Obvious
      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22599
      #2
      Re: bizhub 420 regarding OACB and counter

      I just called the hotline last Friday on that exact question for the bizhub 423. The answer was "No. The count restarts at zero. Period."

      The serial number re-entry was easy enough. Did you figure out how to do the license management repair? I'm still working on that part. =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • enygma
          Technician
          • Aug 2009
          • 17
          #3
          Re: bizhub 420 regarding OACB and counter

          Thank you for the reply. About the license management repair, i have not yet encounter it.

            Comment

            • blackcat4866
              Master Of The Obvious
              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22599
              #4
              Re: bizhub 420 regarding OACB and counter

              I'm not exactly sure what license disappears, but it's lost when the NVRAM is removed from the original board.

              Two hours on hold for 2 minutes of advice. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

                Comment

                • Albonline
                  Service Manager
                  1,000+ Posts
                  • Sep 2008
                  • 1088
                  #5
                  Re: bizhub 420 regarding OACB and counter

                  Originally posted by blackcat4866
                  I'm not exactly sure what license disappears, but it's lost when the NVRAM is removed from the original board.

                  Two hours on hold for 2 minutes of advice. =^..^=
                  you need to print out the licence renew request number, then log on to konicas licence management server ,input the request number ,it will give you a number to input to the mfp, and the error will be cleared

                    Comment

                    • blackcat4866
                      Master Of The Obvious
                      Site Contributor
                      10,000+ Posts
                      • Jul 2007
                      • 22599
                      #6
                      Re: bizhub 420 regarding OACB and counter

                      Originally posted by Albonline
                      you need to print out the licence renew request number, then log on to konicas licence management server ,input the request number ,it will give you a number to input to the mfp, and the error will be cleared
                      Yeah. I've got the report. I just need to do the part on the server. =^..^=
                      If you'd like a serious answer to your request:
                      1) demonstrate that you've read the manual
                      2) demonstrate that you made some attempt to fix it.
                      3) if you're going to ask about jams include the jam code.
                      4) if you're going to ask about an error code include the error code.
                      5) You are the person onsite. Only you can make observations.

                      blackcat: Master Of The Obvious =^..^=

                        Comment

                        Previous template Next
                        Working...