KM 1050e - How much longer can I keep it together

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mita-Konica-Tech
    Technician
    • Jul 2011
    • 76

    #16
    Re: KM 1050e - How much longer can I keep it together

    Originally posted by Kidaver
    Follow up on the PF-602 not lifting. The paper feed assy was not dropping down all the way to turn PS9 off. I assume they are slamming the tray 5 shut but they'll never admit to it but I mentioned it anyways. Just had to realign the gear teeth so it dropped down correctly.
    You think for all the money they spent on these machines, they take a little better care...they probably used their foot to shut the drawer...typical customer....KICK IT.....

    Comment

    • Mita-Konica-Tech
      Technician
      • Jul 2011
      • 76

      #17
      Re: KM 1050e - How much longer can I keep it together

      Originally posted by blackcat4866

      Hey, I ordered two "Cut Kits" today for the PRO950's. It should be interesting to install. =^..^=
      Did you get your kits installed yet....???

      Comment

      • blackcat4866
        Master Of The Obvious

        Site Contributor
        10,000+ Posts
        • Jul 2007
        • 22999

        #18
        Re: KM 1050e - How much longer can I keep it together

        The mounting kits arrived. The recycle units are backordered. I really wanted to do it with the developer change, but may have to do it later since this one machine is dumping toner on the bed like crazy. If they're not here by Monday, I'm changing the developer regardless. =^..^=
        If you'd like a serious answer to your request:
        1) demonstrate that you've read the manual
        2) demonstrate that you made some attempt to fix it.
        3) if you're going to ask about jams include the jam code.
        4) if you're going to ask about an error code include the error code.
        5) You are the person onsite. Only you can make observations.

        blackcat: Master Of The Obvious =^..^=

        Comment

        Working...