Enable Graphic Art package on Fiery s300?

[sanimir]

You update via rip lcd

[oxident]

Re: Enable Graphic Art package on Fiery s300?

But you still need another machine for the installation CD?

[sanimir]

This machine have cd. Almost all external rip have cd/dvd

[jotunn]

Re: Enable Graphic Art package on Fiery s300?

No, let me clear that.
There are two kind of Fiery controllers:
- embedded - without CD-ROM, without built-in LCD and _without_ possibility of installing options
- standalone - with CD-ROM (or DVD-ROM in newer Fiery controllers), built-in LCD, and possibility of installing various options

With embedded controller you can communicate through a copier touch panel - after installation of such Fiery controller additional menu is displayed on screen. There is almost no possibility to "extend" those Fierys, you can add a memory, install newer OS version (if there is any, through network/USB with special app, or locally with pendrive), or install patches, and nothing more...

Standalone Fiery has built-in small LCD for configuration and also shows additional menu on copier screen. You can install software (and options) through local CD/DVD drive.

[kronical]

Re: Enable Graphic Art package on Fiery s300?

No, let me clear that.
There are two kind of Fiery controllers:
- embedded - without CD-ROM, without built-in LCD and _without_ possibility of installing options
- standalone - with CD-ROM (or DVD-ROM in newer Fiery controllers), built-in LCD, and possibility of installing various options

With embedded controller you can communicate through a copier touch panel - after installation of such Fiery controller additional menu is displayed on screen. There is almost no possibility to "extend" those Fierys, you can add a memory, install newer OS version (if there is any, through network/USB with special app, or locally with pendrive), or install patches, and nothing more...

Standalone Fiery has built-in small LCD for configuration and also shows additional menu on copier screen. You can install software (and options) through local CD/DVD drive.

You certainly can add options, pull the rubber plug out of the usb port. you can also use usb cd/dvd drives.

The dongle goes into the fiery, not the workstation.

[oxident]

Re: Enable Graphic Art package on Fiery s300?

The dongle goes into the fiery, not the workstation.

Except for the Impose (aka DocBuilder, aka SeeQuence) function. This dongle goes into the workstation.