orientation scan problem

[zuper]

Re: orientation scan problem

You are right! The binding, was The binding!

Thank you very much!

[zuper]

Re: orientation scan problem

8.5x11 feeds long edge first, and comes out fine... 8.5x13 can only be fed short edge. Make sure you specify under Original Settings the correct orientation and binding direction of the original.

Hi, I am sure i specify the god orientation and direction, but scan wrong
feed the short edge (is only way) and i chose the original setting horizontal

[kronical]

Re: orientation scan problem

Hi! I have more information

the problem is when i scanning from document 2 side and the paper size is 8.5*13in. if is 8.5*11 scan normaly

i attach an example

what I can tray?

thanks

8.5x11 feeds long edge first, and comes out fine... 8.5x13 can only be fed short edge. Make sure you specify under Original Settings the correct orientation and binding direction of the original.

[zuper]

Re: orientation scan problem

Hi! I have more information

the problem is when i scanning from document 2 side and the paper size is 8.5*13in. if is 8.5*11 scan normaly

i attach an example

what I can tray?

thanks

[kingarthur]

Re: orientation scan problem

are you scanning landscape or portrait, have you got samples

[zuper]

Re: orientation scan problem

sorry, the model is bizhub 420

[Synaux]

Re: orientation scan problem

Not sure I can help you without a model number...
But I can't think of a setting that will mess with page orientation only on specific pages--in my experience.

[zuper]