[Jamming] bizhub c25 constantly jamming onduplex

[malthus]

I have bizhub c25 constantly jams indouble sided mode have tried changing boards main motors sensors but the paper is not fed back in for second side and registers an output jam both clutches have also been changed

any one have any ideas

[JustManuals]

Re: bizhub c25 constantly jamming onduplex

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[malthus]

Re: bizhub c25 constantly jamming onduplex

[QUOTE=JustManuals.com;368590]This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com
[malthus/QUOTE] dont need any manuals have full access to infohub

[Kevin12]

Re: bizhub c25 constantly jamming onduplex

I have bizhub c25 constantly jams indouble sided mode have tried changing boards main motors sensors but the paper is not fed back in for second side and registers an output jam both clutches have also been changed

any one have any ideas

Hi

Did you manage to sort this problem out?

[copier tech]

Re: bizhub c25 constantly jamming onduplex

I expect so as it was nearly 3 years ago!

[guycampo]

Re: bizhub c25 constantly jamming onduplex

I expect so as it was nearly 3 years ago!

What did you do to fix it? I have the same problem and I went thru the same exact replacement of components.
Thank you
GC

[JR2ALTA]

Re: bizhub c25 constantly jamming onduplex

What did you do to fix it? I have the same problem and I went thru the same exact replacement of components.
Thank you
GC

You might have a gap between the idle and drive rollers. Had this problem, brought into shop and found that plastic door wasn't snapped in probably to duplex section. It was a long time ago, i think it was a c25 or comparable