BizHub 250 locked up

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • copyman
    Owner / Technician

    Site Contributor
    2,500+ Posts
    • Sep 2005
    • 4534
    #1

    BizHub 250 locked up

    Machine starts to warm up but freezes with the Kon/Min logo on display. I seem to recall this has to do with the NVRAM? Also heard of a special program / firmware that can reset the NVRAM?
    Any ideas appreciated. Thanks
    Tags: 250, bizhub, display, firmware, locked, logo, program, reset, warm
    • wseyller
      Service Manager

      1,000+ Posts
      • Sep 2012
      • 1129
      #2
      Re: BizHub 250 locked up

      There is a special procedure to do something similiar when getting some error codes related to an nvram issue but if it won't go past the logo then an nvram problem would mean replacement of nvram and mfp board.

        Comment

        • Hansoon
          Field Supervisor

          Site Contributor
          2,500+ Posts
          • Sep 2007
          • 3350
          #3
          Re: BizHub 250 locked up

          Try reseating first the MFBS board (under the scanner, the one with the network interface on it). This helped me in many cases.

          Hans
          “ Sent from my Intel 80286 using MS-DOS 2.0 “
          https://www.copytechnet.com/images/smilies/biggrin.png

            Comment

            • JustManuals
              Field Supervisor

              5,000+ Posts
              • Jan 2006
              • 9838
              #4
              Re: BizHub 250 locked up

              I have the Ricoh NVRAM reset program, email me if you want it.

              Paul@justmanuals.com

                Comment

                Previous template Next
                Working...