Can find part in C280 manual

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • David Morrison
    Digital Tech II
    • Feb 2010
    • 43

    [Misc] Can find part in C280 manual

    I'm actually working on a VL2822C, but it cross references with a C280. Anyway, I have a broken connector; the connector that the finisher plugs into. I can't seem to find it in the manual. What section can I find this in?
    Attached Files
  • JustManuals
    Field Supervisor

    5,000+ Posts
    • Jan 2006
    • 9919

    #2
    Re: Can find part in C280 manual

    Look harder.

    Comment

    • David Morrison
      Digital Tech II
      • Feb 2010
      • 43

      #3
      Re: Can find part in C280 manual

      Originally posted by JustManuals.com
      Look harder.
      I don't have time. I fixed 7 copiers today and incompleted 1 for parts. I have 5 to do for tomorrow. I asked my parts guy to look up the part for me this afternoon and he hasn't found it yet.

      Comment

      • CompyTech
        Super Tech

        500+ Posts
        • Feb 2011
        • 706

        #4
        Re: Can find part in C280 manual

        I think it's part of a harness that goes back to the PRCB. I never could find it either. Neither the one for the ADF too. Might want to give KMBS a call and see if they could help.

        Good luck.

        Comment

        • lucky13
          Trusted Tech

          100+ Posts
          • May 2008
          • 125

          #5
          Re: Can find part in C280 manual

          A0edn10d00 fns relay harness page 47 of the c280,c360,c220 parts manual this is also the adf harness as well

          Comment

          • emujo
            Field Supervisor

            2,500+ Posts
            • Jun 2009
            • 3009

            #6
            Re: Can find part in C280 manual

            Originally posted by David Morrison
            I don't have time. I fixed 7 copiers today and incompleted 1 for parts. I have 5 to do for tomorrow. I asked my parts guy to look up the part for me this afternoon and he hasn't found it yet.

            No whining!!!! Were all busy believe it or not.
            If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

            Comment

            • David Morrison
              Digital Tech II
              • Feb 2010
              • 43

              #7
              Re: Can find part in C280 manual

              Originally posted by lucky13
              A0edn10d00 fns relay harness page 47 of the c280,c360,c220 parts manual this is also the adf harness as well
              I don't think that's right. I need the part that the harness plugs into. I included a picture in my original quote. Or does the harness come with the outside connector?
              Last edited by David Morrison; 08-29-2013, 01:27 AM.

              Comment

              • emujo
                Field Supervisor

                2,500+ Posts
                • Jun 2009
                • 3009

                #8
                Re: Can find part in C280 manual

                Did you look at the parts book? It clearly shows he's correct. ADF/Finsher harness are 1 item.
                If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22649

                  #9
                  Re: Can find part in C280 manual

                  Originally posted by David Morrison
                  I don't have time. I fixed 7 copiers today and incompleted 1 for parts. I have 5 to do for tomorrow. I asked my parts guy to look up the part for me this afternoon and he hasn't found it yet.
                  I don't have time? Yet you expect someone else to look it up for you on their own time? Only one word for that: lazy.
                  =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                  Comment

                  • David Morrison
                    Digital Tech II
                    • Feb 2010
                    • 43

                    #10
                    Re: Can find part in C280 manual

                    Originally posted by emujo
                    Did you look at the parts book? It clearly shows he's correct. ADF/Finsher harness are 1 item.
                    Of course I looked at the parts book.

                    Comment

                    • David Morrison
                      Digital Tech II
                      • Feb 2010
                      • 43

                      #11
                      Re: Can find part in C280 manual

                      Originally posted by blackcat4866
                      I don't have time? Yet you expect someone else to look it up for you on their own time? Only one word for that: lazy.
                      =^..^=
                      OMG! If I can't find it, my parts guy can look for it; isn't that his job? My daily average is approximately 8 copiers/day and everyone wants their copier fixed first. If I can't find a part in a reasonable amount of time (maybe an hour), I can certainly ask someone else. Sorry I even asked in this forum. You are the lazy one for not lending me a hand when a fellow technician is in need! In the 5 years I've serviced copiers, I've only had to have someone else look up a part for me maybe 2 times. (20 years with laser printers; never had to ask). Give me a break! My parts guy told me this part has never been ordered for any of our customers in Maine. Geesh. Grow up, will you!? I ask a simple question and you get all over me.

                      Comment

                      • David Morrison
                        Digital Tech II
                        • Feb 2010
                        • 43

                        #12
                        Re: Can find part in C280 manual

                        Originally posted by lucky13
                        A0edn10d00 fns relay harness page 47 of the c280,c360,c220 parts manual this is also the adf harness as well
                        Thank you for your help. I forwarded your email to my parts guy and he agreed that that sounds right. Meanwhile, he was stripping the connector off a spare 2822C in the warehouse. It's nice to know that there are helpful people on here and not just troublemakers. We are all in this together and we should be helping one another; not bashing each other.

                        Cheers!

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22649

                          #13
                          Re: Can find part in C280 manual

                          your choice.

                          bridge_burning.jpg
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                          Comment

                          • emujo
                            Field Supervisor

                            2,500+ Posts
                            • Jun 2009
                            • 3009

                            #14
                            Re: Can find part in C280 manual

                            [QUOTE=David Morrison;375841. We are all in this together and we should be helping one another; not bashing each other.

                            Cheers! [/QUOTE]
                            I'm sorry, I seem to have missed all your helpful posts and technical inputs...it's a 2 way street, take the bashing and say thanks or nothing until you've contributed something. Emujo
                            If you don't see your question answered in the forum, please don't think it's OK to PM me for a personal reply...I do not give out firmware and/or manuals.

                            Comment

                            • David Morrison
                              Digital Tech II
                              • Feb 2010
                              • 43

                              #15
                              Re: Can find part in C280 manual

                              Originally posted by emujo
                              I'm sorry, I seem to have missed all your helpful posts and technical inputs...it's a 2 way street, take the bashing and say thanks or nothing until you've contributed something. Emujo
                              I help when I can. I'm not on here a lot.

                              Comment

                              Working...