BH C452 drum reset chip

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Desert Rat
    Service Manager

    Site Contributor
    1,000+ Posts
    • May 2008
    • 1089

    #1

    BH C452 drum reset chip

    I have to ask this, I think I know the answer. Can that device be re-used on another
    Set of drums?
    I'm thinking No.

    DR
  • Copier Addict
    Aging Tech

    Site Contributor
    10,000+ Posts
    • Jul 2013
    • 14380

    #2
    Re: BH C452 drum reset chip

    What device are you asking about?

    Comment

    • copier tech
      Field Supervisor

      5,000+ Posts
      • Jan 2014
      • 8103

      #3
      Re: BH C452 drum reset chip

      Yeah what's your question?
      but all you have to do is update the firware then you never to to buy the chips
      Let us eat, drink, and be merry, because tomorrow we may die!

      For all your firmware & service manual needs please visit us at:

      www.copierfirmware.co.uk - www.printerfirmware.co.uk

      Comment

      • Desert Rat
        Service Manager

        Site Contributor
        1,000+ Posts
        • May 2008
        • 1089

        #4
        Re: BH C452 drum reset chip

        I am asking if the drum reset for the drums can be used more than once?

        Actually I would like to have that firmware upgrade.

        DR

        Comment

        • copier tech
          Field Supervisor

          5,000+ Posts
          • Jan 2014
          • 8103

          #5
          Re: BH C452 drum reset chip

          Once you turn on the iu disable message you will never get the "replace iu" message.
          So any IU will run in that MFD
          Let us eat, drink, and be merry, because tomorrow we may die!

          For all your firmware & service manual needs please visit us at:

          www.copierfirmware.co.uk - www.printerfirmware.co.uk

          Comment

          • Desert Rat
            Service Manager

            Site Contributor
            1,000+ Posts
            • May 2008
            • 1089

            #6
            Re: BH C452 drum reset chip


            copier tech,
            Thank you for the help. As it turns out I got my chips and models mixed up.
            I was think that the chip reset device for the BHC360 was for the C452.
            That's where I was confused.

            Still I would like to have the newer firmware. Anyone care to share?

            Thanks

            DR

            Comment

            Working...