+452

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • CrapAimer
    Trusted Tech

    250+ Posts
    • Jan 2010
    • 296
    #1

    +452

    Hi All

    Have a +452 colour machine, trying to do the image graduation but keeps coming up as NG. Have tried moving the paper on the glass as suggested but didn't help. Cleaned the I D sensors. Anyone else had this problem.

    George
    Tags: None
    • kingarthur
      Service Manager

      1,000+ Posts
      • Feb 2008
      • 1325
      #2
      Re: +452

      Are you getting any "P" codes, the last time I had persistant "NG" whilst carrying out gradation, was on a C352, I had to increase the "scan area" in tech rep mode
      Tip for the day; Treat every problem as your dog would.....If you cant eat it or f*ck it....then p*ss on it & walk away...

        Comment

        • habik
          Service Manager

          Site Contributor
          1,000+ Posts
          • Apr 2010
          • 2013
          #3
          Whats the life of Imaging units like and the ITB? Are the laser view windows clean? Image Stabilise + Background reset?


          Sent from my iDon't believe in marketing device using Tapatalk
          .OK Google! ... will I need Berrocca this morning?
          Firmwares HERE

            Comment

            • CrapAimer
              Trusted Tech

              250+ Posts
              • Jan 2010
              • 296
              #4
              Re: +452

              No P codes. Will try scan area

              Thanks
              George

                Comment

                • blackcat4866
                  Master Of The Obvious

                  Site Contributor
                  10,000+ Posts
                  • Jul 2007
                  • 22997
                  #5
                  Re: +452

                  Are your copy and scan images skewed? I've had a few bent scanners, that can't read the gradation charts. The cue to watch for is skewed scans. =^..^=
                  If you'd like a serious answer to your request:
                  1) demonstrate that you've read the manual
                  2) demonstrate that you made some attempt to fix it.
                  3) if you're going to ask about jams include the jam code.
                  4) if you're going to ask about an error code include the error code.
                  5) You are the person onsite. Only you can make observations.

                  blackcat: Master Of The Obvious =^..^=

                    Comment

                    Previous template Next
                    Working...