Few more issues with Bizhub 200

[eli]

Re: Few more issues with Bizhub 200

Those pictures are of the transport/transfer section and are not part of the duplex unit.

Ok, so I pulled the top part out and inspected the wires there.. looks clean. Is this the switchback unit?

IMG_20141015_130528.jpgIMG_20141015_130537.jpgIMG_20141015_130650.jpg

[darry1322]

Re: Few more issues with Bizhub 200

Yep, that's the switchback.

[eli]

Re: Few more issues with Bizhub 200

Yep, that's the switchback.

What would be the next step? Replacing this unit?

[emujo]

Re: Few more issues with Bizhub 200

No more "and then"...lol Emujo

[HuronMan]

Re: Few more issues with Bizhub 200

We went back with a pwb-a board. It didn't fix it. Gunna try flashin it and mfbs.

[Phrag]

Re: Few more issues with Bizhub 200

Just check and make sure none of the pins are bent etc. I had the same issue as you. I reseated the connectors and I got the Duplex option back.

[eli]

Re: Few more issues with Bizhub 200

Just check and make sure none of the pins are bent etc. I had the same issue as you. I reseated the connectors and I got the Duplex option back.

Thank you! and thanks to everyone who commented in this thread.

I was able to fix it. One of the pins was indeed crooked and wasn't going into the connector correctly. The copier works perfectly now!

[blackcat4866]

Re: Few more issues with Bizhub 200

Congratulations! =^..^=