all UI and toner undetected on Minolta C203

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kamalovitch
    Junior Member
    • Jun 2009
    • 6

    #1

    all UI and toner undetected on Minolta C203

    need help please, the machine is operating normally, and this morning all yes and toner undetected on Minolta C203, it returns a message saying that we must put IU and toner when I replace the same problem,


    thank you.
  • EarthKmTech
    Step aside, noob

    1,000+ Posts
    • May 2009
    • 2139

    #2
    Re: all UI and toner undetected on Minolta C203

    I would assume blown icp on prcb from/or a shorted tc or iu chip contact pin.

    Comment

    • kamalovitch
      Junior Member
      • Jun 2009
      • 6

      #3
      Re: all UI and toner undetected on Minolta C203

      Originally posted by EarthKmTech
      I would assume blown icp on prcb from/or a shorted tc or iu chip contact pin.

      I have the problem on all iu and toners, the machine does not detect any

      Comment

      • paulrid
        Trusted Tech

        100+ Posts
        • Nov 2011
        • 206

        #4
        Re: all UI and toner undetected on Minolta C203

        Have you just changed a toner or IU? I have seen similar things when data on one of the chips is corrupt.
        if so try changing it again.
        Paul.

        Comment

        • kamalovitch
          Junior Member
          • Jun 2009
          • 6

          #5
          Re: all UI and toner undetected on Minolta C203

          Originally posted by paulrid
          Have you just changed a toner or IU? I have seen similar things when data on one of the chips is corrupt.
          if so try changing it again.
          Paul.
          I charge all iu but the problem persists,

          Comment

          • paulrid
            Trusted Tech

            100+ Posts
            • Nov 2011
            • 206

            #6
            Re: all UI and toner undetected on Minolta C203

            Originally posted by kamalovitch
            I charge all iu but the problem persists,
            and the toner?
            paul.

            Comment

            • blackcat4866
              Master Of The Obvious

              Site Contributor
              10,000+ Posts
              • Jul 2007
              • 22960

              #7
              Re: all UI and toner undetected on Minolta C203

              Does KM have a place in the service mode where they designate what brand or badge will be displayed? Let's say it's designated as an Oce' and you've installed KM IU's and toners. =^..^=
              If you'd like a serious answer to your request:
              1) demonstrate that you've read the manual
              2) demonstrate that you made some attempt to fix it.
              3) if you're going to ask about jams include the jam code.
              4) if you're going to ask about an error code include the error code.
              5) You are the person onsite. Only you can make observations.

              blackcat: Master Of The Obvious =^..^=

              Comment

              • Blizzoo
                Senior Tech

                Site Contributor
                500+ Posts
                • Aug 2013
                • 599

                #8
                Re: all UI and toner undetected on Minolta C203

                IU lot number it's shown in service mode?
                Defects are simple, our mind is complicated

                Comment

                • EarthKmTech
                  Step aside, noob

                  1,000+ Posts
                  • May 2009
                  • 2139

                  #9
                  Re: all UI and toner undetected on Minolta C203

                  is it saying they arent inserted OR they are the incorrect type ?

                  Comment

                  • PeterG
                    Trusted Tech

                    100+ Posts
                    • Jul 2008
                    • 177

                    #10
                    Re: all UI and toner undetected on Minolta C203

                    If my memory is to be relied on, I seem to recall that this can be caused by bent, "shorting" contacts on one of the image units!

                    Comment

                    • bigmark
                      Technician
                      • Sep 2008
                      • 39

                      #11
                      Re: all UI and toner undetected on Minolta C203

                      what logo shows up when you reboot the MFP? is it the rocket ship/outer space logo... or the KM logo. If its the outer space logo.. its also possible the NVRAM has blown, there is a recovery procedure and a few switches that have to be set to recover from this. another option is to print out the configuration page.. if it lists the model as a generic model... again, NVRAM issues.

                      Comment

                      Working...