If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Still looking around if i find anything i will add. eventually you will need to just reformatt the hdd.
Solution ID TAUS0700397EN* Solution Usage Description ADMINISTRATOR PASSWORD NOT VALID DUE TO UNAUTHORIZED ACCESS message. Solution CAUSE: Machine data has been corrupted.
SOLUTION: Remove all four image units and perform a Data Clearin Service Mode, System 1, Initialization.
WARNING : FAILURE TO REMOVE THE IMAGE UNITS WILL RESULT IN HAVING TO REPLACE THEM.
Ok so is this the reason why I cannot reset the admin password in service mode?
Okay, so what should I do next then? If this is the case?
Comment