Konica Minolta C280 Image

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mearmi
    Trusted Tech

    Site Contributor
    250+ Posts
    • Oct 2010
    • 346
    #1

    [Misc] Konica Minolta C280 Image

    Any one can advise about this problem? From ADF and Platen we are getting same image (See Attachment).

    Might be something is wrong with the scanner while transportation.

    Thanks and Kind Regards,

    Mearmi
    Attached Files
    Tags: None
    • allan
      RTFM!!

      5,000+ Posts
      • Apr 2010
      • 5459
      #2
      Re: Konica Minolta C280 Image

      Hehe thats bad. Try to pull up on the front left corner of the scaner while making a print.
      Whatever

        Comment

        • hotfuser
          Trusted Tech

          100+ Posts
          • Jan 2014
          • 180
          #3
          Re: Konica Minolta C280 Image

          Originally posted by mearmi
          Any one can advise about this problem? From ADF and Platen we are getting same image (See Attachment).

          Might be something is wrong with the scanner while transportation.

          Thanks and Kind Regards,

          Mearmi
          Yes pull the left corner up. I have even put a piece of 2x2 wood in the corner as a support

            Comment

            • Albonline
              Service Manager

              1,000+ Posts
              • Sep 2008
              • 1131
              #4
              Re: Konica Minolta C280 Image

              look closely at first mirror, think it popped off the clip.

                Comment

                • wseyller
                  Service Manager

                  1,000+ Posts
                  • Sep 2012
                  • 1129
                  #5
                  Re: Konica Minolta C280 Image

                  Originally posted by hotfuser
                  Yes pull the left corner up. I have even put a piece of 2x2 wood in the corner as a support
                  This would make more sense to me. Doesn't sound like lifting the adf a little would help since it happens on the glass also.

                    Comment

                    • hotfuser
                      Trusted Tech

                      100+ Posts
                      • Jan 2014
                      • 180
                      #6
                      Re: Konica Minolta C280 Image

                      Originally posted by wseyller
                      This would make more sense to me. Doesn't sound like lifting the adf a little would help since it happens on the glass also.
                      No not lifting the ADF the corner of the scanner unit itself. There is nothing supporting the front left corner so if it has been lent on it will dip in that corner.

                        Comment

                        • blackcat4866
                          Master Of The Obvious

                          Site Contributor
                          10,000+ Posts
                          • Jul 2007
                          • 22929
                          #7
                          Re: Konica Minolta C280 Image

                          We used to call this the Ricoh Bear Hug. Mid sized Ricohs from the middle 1990's were particularly prone to someone leaning on the scanner and bending the frame. Let's call her Bertha.

                          Pull the machine away from the wall and go around behind it. Grab the machine with a bear hug under the scanner. When noone is looking pick the machine up off the ground. you may have to do this a couple times to get the desired effect.

                          Our in-shop tech uses an automotive scissors jack, and knowing the desired measurements, jacks the scanner up a precise amount. Since I never seem to see the same model twice, I would never know what those measurements would be.

                          Until you get this resolved you won't be able to complete a stabilization and gradation. The machine will error out. =^..^=
                          If you'd like a serious answer to your request:
                          1) demonstrate that you've read the manual
                          2) demonstrate that you made some attempt to fix it.
                          3) if you're going to ask about jams include the jam code.
                          4) if you're going to ask about an error code include the error code.
                          5) You are the person onsite. Only you can make observations.

                          blackcat: Master Of The Obvious =^..^=

                            Comment

                            • mearmi
                              Trusted Tech

                              Site Contributor
                              250+ Posts
                              • Oct 2010
                              • 346
                              #8
                              Re: Konica Minolta C280 Image

                              Originally posted by Albonline
                              look closely at first mirror, think it popped off the clip.
                              Thanks for your reply. Have checked all the mirrors are in home position.

                              regards,

                                Comment

                                • Blizzoo
                                  Senior Tech

                                  Site Contributor
                                  500+ Posts
                                  • Aug 2013
                                  • 594
                                  #9
                                  Re: Konica Minolta C280 Image

                                  Under scanner rail you have 3 black plastic bushings (item 12 in attach), one of them could be pooped off during transportation.
                                  Untitled.jpg
                                  Defects are simple, our mind is complicated

                                    Comment

                                    Previous template Next
                                    Working...