[CQ] Konica Minolta C253 2 Green Lines

[mearmi]

Konica Minolta C253, Getting 2 Green Vertical Lines on Print/Image and on half tones as well

Did Gradation, Stabilization but problem still exists.

Please find the attached sample image.

Thanks and Regards,

Mearmi

[Blizzoo]

Re: Konica Minolta C253 2 Green Lines

How are halftones tests?

[mearmi]

Re: Konica Minolta C253 2 Green Lines

How are halftones tests?

There is line as well

[Copier Addict]

Re: Konica Minolta C253 2 Green Lines

I would say you magenta IU has a void area in that spot. Try cleaning the printhead.
If that doesn't fix it you can try disassembling the IU and fixing it that way.
Otherwise replace it.
Hope this helps.

[allan]

Re: Konica Minolta C253 2 Green Lines

I have made a special tool to clean the laser glass on these machines those swabs only push the dirt around.
Take a blower brush and attach a rubber pipe to it then you can lift the shutter and clean the glass with air.

[Gift]

Re: Konica Minolta C253 2 Green Lines

end user question here

[mearmi]

Re: Konica Minolta C253 2 Green Lines

I have made a special tool to clean the laser glass on these machines those swabs only push the dirt around.
Take a blower brush and attach a rubber pipe to it then you can lift the shutter and clean the glass with air.

Thanks a lot Allan. By cleaning the laser and replacing IDC sensors. Problem has gone.

[mearmi]

Re: Konica Minolta C253 2 Green Lines

end user question here

Thanks a lot for your help. BY replacing the IDC sensors. Problem has gone.

[Gift]

Re: Konica Minolta C253 2 Green Lines

impressive...