I m beginning to hate this model!!! A C280 stuck in warm up or KM screen,disconnected hard drive, updated firmware , reintialized all data,it will not let me into Admin so can't check power save setting.Tried to reboot on many occasions, I'm running out of ideas and patience.Thank you for any suggestions.
-
-
Re: c280 stuck
Try resetting the nvram using the nvram reset procedure. Should be on km website. -
Re: c280 stuck
If this is the model with the ssd its knackered and will need to be sent back to KM for a replacement.Comment
-
Re: c280 stuck
I'm pretty sure the C280 is pre-SSD. IIRC the "e" series is the first SSD product. =^..^=If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=Comment
-
Re: c280 stuck
I think the C280 has an ssd but it doesn't have the ssd problem like the E series. On the E series the ssd includes the nvram built in where as the C280 it is separate.
Sent from my XT1254 using TapatalkComment
Comment