Copystar cs400i log in

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • digicor
    Service Manager

    1,000+ Posts
    • Jul 2008
    • 1150
    #1

    Copystar cs400i log in

    I was in the web access of the Copystar CS400I but i could not change any thing to set scanning to email
    the PW i used was admin00 but this didnt seem to get me where i needed
    what is the default PW to be able to change things in web access?
    or
    where can i set this up from the panel...?
    i mainly do Ricoh /sharp so this is new to me
    Thanks
    Tags: None
    • blackcat4866
      Master Of The Obvious

      Site Contributor
      10,000+ Posts
      • Jul 2007
      • 22927
      #2
      Re: Copystar cs400i log in

      Lets start with an existent model number. There is no CS-400i.
      How about 400ci, 420i, 4035, C4035E, or 4050? =^..^=
      If you'd like a serious answer to your request:
      1) demonstrate that you've read the manual
      2) demonstrate that you made some attempt to fix it.
      3) if you're going to ask about jams include the jam code.
      4) if you're going to ask about an error code include the error code.
      5) You are the person onsite. Only you can make observations.

      blackcat: Master Of The Obvious =^..^=

        Comment

        • digicor
          Service Manager

          1,000+ Posts
          • Jul 2008
          • 1150
          #3
          Re: Copystar cs400i log in

          sorry , it was a CI and thanks but i figured it out
          Im not an everyday Kyocera/Copystar tech, so my model was a little off

            Comment

            Previous template Next
            Working...